Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

h and m

Welcome Guest, Log in or Register
Author 
brad

01-19-2004 04:18:05




Report to Moderator

will an m motor bolt up to an h transmission? would like to put one in my 49 h.




[Log in to Reply]   [No Email]
Fatrmall Ed

01-19-2004 04:53:27




Report to Moderator
 Re: h and m in reply to brad, 01-19-2004 04:18:05  
Dont think so. Ed



[Log in to Reply]  [No Email]
ChadS

01-19-2004 19:47:27




Report to Moderator
 Re: Re: h and m in reply to Fatrmall Ed, 01-19-2004 04:53:27  
A 301 6 cyl engine will bolt right in!! You would just have to machine the flywheel to adapt the H starter ring to the 460 flywheel. Everything from the 460 from the bell housing forward will bolt right on to the H. Chad



[Log in to Reply]  [No Email]
brad

01-20-2004 04:17:28




Report to Moderator
 Re: Re: Re: h and m in reply to ChadS, 01-19-2004 19:47:27  
if i were to pull with this tractor what class would i have to pull in? also would i have to use a gas engine or could i use a diesel? also would i have to change up the trans and rearend or would they work like they are. thanks brad



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy