Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

where to check trans. oil on Super C

Welcome Guest, Log in or Register
Author 
Larry B.

01-14-2004 06:01:23




Report to Moderator

My cousin bought a Super C last weekend and can anyone tell us where the level plug is to check the transmisson oil and how much oil the tranny holds?




[Log in to Reply]   [No Email]
Randy in NE

01-14-2004 06:13:08




Report to Moderator
 Re: where to check trans. oil on Super C in reply to Larry B., 01-14-2004 06:01:23  
It should be the same as on a C. It is on the back of the rearend just below the belt pulley. There is a square headed plug. The level should be up to that level, or reasonably close. You can add oil there or through the fill plug in the operators platform next to the clutch peddle. It has a recessed 1/2" (might be 3/8") head in it. Your 1/2" drive rachet should fit right in it. The transmission/rearend holds just under 5 gallons. Depends on if you drain the oil out of the pto housing. There is an oil slinger in the rearend that supplies oil to the pto. Most but not all of the oil will drain back into the rearend. The drain plug is located on the bottom of the housing and you need to remove the drawbar to get at it.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy