TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Order Farmall Cub Parts Online

new rims for cub a little different?

Welcome Guest, Log in or Register

Author

rex

01-13-2004 14:36:00

Report to Moderator

Just purchase a new set of rims for a Cub the loops are not for square head bolts the new loops are smaller what do you do use a longer bolt with a flat washer on the outside of the loop ?

[Log in to Reply] [No Email]

Mark in Mi.

01-14-2004 05:31:03

Report to Moderator

Re: new rims for cub a little different? in reply to rex, 01-13-2004 14:36:00

I purchased new rims for my Farmall B and they require carrage bolts. I bought them at the same plase I purchased the rims. They will have correct length in their books.

Mark

[Log in to Reply] [No Email]

Hugh MacKay

01-14-2004 03:02:18

Report to Moderator

Re: new rims for cub a little different? in reply to rex, 01-13-2004 14:36:00

Rex: If they are the same as the wheels I bought for my Super A, I don't think I would try the carriage bolt idea. At least make sure that hole is going to hold a carriage bolt from turning. I looked at this with mine, decided carriage bolt would be a headache. I just use a hex head bolt and put them in so head on the rim side. Now you have to get someone else to hold the other wrench, another great non idea from the after market. By the way my wheels came from CaseIH. Most of what they are selling for these old tractors is after market, as they don't make it anymore.

[Log in to Reply] [No Email]

Rudi

01-14-2004 11:11:54

Report to Moderator

Re: Re: new rims for cub a little different? in reply to Hugh MacKay, 01-14-2004 03:02:18

Hugh:

Gordon says HI! It is minus 26 today with a wind chill of -42.... which for all south of the 49th is the same as -42F..... We got blizzard conditions, too cold to go anywhere, staying home and making lots of fires.

Cub Manuals

[Log in to Reply] [No Email]

Hugh MacKay

01-14-2004 13:24:30

Report to Moderator

Re: Re: Re: new rims for cub a little different? in reply to Rudi, 01-14-2004 11:11:54

Rudi: It would be a great day at the head of thr Tantramar Marsh, somewhere around Point-a-Bute. I have been there on a day like you are having. It's -13c here right now, was -19C early this morning. We are suposed to get 15 to 25 cm of snow tonight. I went out this morning just to make sure the Farmall 130 was in shape for tomorrow morning plowing. I topped the fluids up added a bit of methyl hydrate to gas tank. I specifically went there to change points, but flesh was unwilling. I tried the tractor, it fired right up, thought if engine was warm, the point job would go a bit easier. Old point are still in tractor.

Speaking of Gordon, tell him I got one of those e mails that people send to their ageing friends, from his kid brother. It starts out, I can't remember if I sent you this, and you can guess the rest of it.

Does Gordon have 3 tractors by now? You never told me what you have for tractors? Sounded like Cubs were in the fore front.

[Log in to Reply] [No Email]

Rudi

01-14-2004 14:24:30

Report to Moderator

Re: Re: Re: Re: new rims for cub a little differen in reply to Hugh MacKay, 01-14-2004 13:24:30

Hugh:

Well, today would be a great day for wind turbines. Gusts between 80 and 98 kph here, so I imagine be well over 100 on the marsh. Sustained winds ar 66kph.. it is a might nippy.

Gordon does have three now - the H, Super A and the Cub -- all restored. I still have to scan his Super A but the pics of his Cub and a few of the H are on the Cub Manual Server at the link below. After you get to the server, click on the Cub and Implement Gallery and then Gordon's Cub I think it is.

Me, well my pics are there too. Ellie-Mae and Jethro. Neither is restored yet, Ellie is a working tractor and Jethro, well he is in serious and I do mean serious need of plenty of TLC. Gonna be fun playing with him. Got the parts all lined up - just got to save up the cash for em...

Meanwhile, I think I will do some more scanning as I sit in the basement beside the furnace making fires.....

Cheers

Cub Manuals

[Log in to Reply] [No Email]

Bigdog

01-13-2004 14:56:35

Report to Moderator

Re: new rims for cub a little different? in reply to rex, 01-13-2004 14:36:00

Try carriage bolts.

[Log in to Reply] [No Email]

Ted From Maine

01-17-2004 10:30:05

Report to Moderator

Re: Re: new rims for cub a little different? in reply to Bigdog, 01-13-2004 14:56:35

I went to Ace Hardware, got number eight hard bolts and self locking nuts the fit the loop holes and long enough to get a full nut plus on each of them. I put the cub rims on one of my A.C B models. worked great all the time I used it. hope this is some help to you.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy