Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

656 Hydro will not more forward or reverse.

Welcome Guest, Log in or Register
Author 
Mark

12-31-2003 17:36:23




Report to Moderator

Im working on a 656 hydro. I checked the charge psi under 4 bolt plate on top. 425 psi I also checked the servo psi 180 to 200 at the multi valve. I removed the check valves and inspect them for sticking. all are free. now what. I ordered a 10k gauge to test the run psi. It does not make any hydrolic noise at all. can you Help. thanks




[Log in to Reply]   [No Email]
Gary

01-01-2004 06:18:55




Report to Moderator
 Re: 656 Hydro will not more forward or reverse. in reply to Mark, 12-31-2003 17:36:23  
Firt thing you are reversed on the charge and servo test ports. Servo test port is under the plate and charge pressure is on the multi valve but the pressures are fine. You said you took the check valves out. If you are talking about the ones inside the center section they don't cause much trouble and they will only keep it from moving in one direction depends on if is the forward or reverse check valve. Remove the two lines coming out of the side of the hydro housing. Put caps on the two fittings don't worry about capping the lines and try to move the tractor becareful the tractor will not stop when you push the pedal you have to stop it with the lever. If it moves the problem is in the drive control valve or foot-inch valve. If it doesn't move the trouble is inside the hydro. Possible relief valve stuck open.Either valve will keep it from moving. Email me if you want more detailed info

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy