Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

560 gas piston

Welcome Guest, Log in or Register
Author 
Rick Wuertz

12-13-2003 08:09:05




Report to Moderator

I have a 560 farmall here with a broken piston. The piston has the part # 367642R1 stamped on the top and right above the part number is stamped the numbers Z-20. I am wondering if this is standard piston or if it is a .020 over piston. Any help would sure be appreciated.
Thanks




[Log in to Reply]   [No Email]
Gary

12-16-2003 17:54:43




Report to Moderator
 Re: 560 gas piston in reply to Rick Wuertz, 12-13-2003 08:09:05  
Don't pay any attention to the Z-20 Zoller made the pistons for IH back then they put their own number inside the piston. If it was .020 oversize it would be stapmed on top of the piston. Have worked on IH lasr 38 years there was never any oversize pistons for the 263 could go 301 with no sleeves or bore block to 291 with sleeves



[Log in to Reply]  [No Email]
E J

12-13-2003 10:14:58




Report to Moderator
 Re: 560 gas piston in reply to Rick Wuertz, 12-13-2003 08:09:05  
560 never had a over bore kit 39/16 was standard.In less the sleeves where pulled and 301 pistons put in.Also they made a 290 which had a 33/4 bore thats possible.



[Log in to Reply]  [No Email]
justin

12-13-2003 11:16:59




Report to Moderator
 Re: Re: 560 gas piston in reply to E J, 12-13-2003 10:14:58  
IH did offer an overbore piston & sleeve set for the 560, but it required the block to be bored to accept a special sleeve. As far as the question about the piston being overbore, the info that was posted indicates the cam ground specs of the piston.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy