Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Ammeter gauge/Which one?

Welcome Guest, Log in or Register
Author 
Buster

11-19-2003 08:20:57




Report to Moderator

I have gone online to order a ammeter guage but they list two with no model distinction. One is 0-30-0 and the other is 0-60-0. It goes on a Farmall 100 converted to 12v




[Log in to Reply]   [No Email]
Bob M

11-19-2003 09:15:56




Report to Moderator
 Re: Ammeter gauge/Which one? in reply to Buster, 11-19-2003 08:20:57  
If the 12 volt conversion uses a generator, a 30 amp ammeter is fine. If it has an alternator then the 60 amp is preferred.



[Log in to Reply]  [No Email]
Ben in KY

11-19-2003 09:46:30




Report to Moderator
 Re: Re: Ammeter gauge/Which one? in reply to Bob M, 11-19-2003 09:15:56  
What Bob said.



[Log in to Reply]  [No Email]
Noah W

11-19-2003 09:14:59




Report to Moderator
 Re: Ammeter gauge/Which one? in reply to Buster, 11-19-2003 08:20:57  
Unless you "pull" a heavy electrical load (really low battery, or lots of electrical accessories, ect.) the 0-30-0 amp gauge should be fine.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy