TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Steering assist for W9-650

Welcome Guest, Log in or Register

Author

RAR/IA

11-16-2003 16:53:51

Report to Moderator

I have a steering assist (power) installed on a WR9 from probably a 650. The valve in the drag link is leaking. Can I rebuild it with common o-rings or is there a kit available. Appreciate any help!

Roger in Iowa

[Log in to Reply] [No Email]

Harold H

11-18-2003 08:32:08

Report to Moderator

Re: Steering assist for W9-650 in reply to RAR/IA, 11-16-2003 16:53:51

Roger,

At one time there would have probably been a kit available. I rebuilt a power steering of this type, not 650, many years ago and it consisted mainly just a bunch of o-rings. May have included a couple or springs also but I don't remember. You should basicly be able to do yours with just new o-rings. Case IH dealer might accidentally suprize you and still have a kit listed. Won't hurt to try dealer first.

Harold H

[Log in to Reply] [No Email]

RAR/IA

11-18-2003 16:46:49

Report to Moderator

Re: Re: Steering assist for W9-650 in reply to Harold H, 11-18-2003 08:32:08

I'll check. The problem is the local dealer was CASE so he does not have books on the older IHC's. Your info helps as I'm always leary of taking something apart that requires unique parts to put back together. See post on the other "Farmall" that we have been back and forth on for more info.
Thanks
Roger

[Log in to Reply] [No Email]

Harold H

11-19-2003 16:57:47

Report to Moderator

Re: Re: Re: Steering assist for W9-650 in reply to RAR/IA, 11-18-2003 16:46:49

Roger,

Some of the IH combines used the same type power steering as on your W9/650 setup into the 60's before they changed to hydrostatic power steering. It would not be the exact same unit, but the same design, and you could probably more easily find a parts book for a breakdown on it for a combine eisier than a tractor. I don't remember if the 403 and 503 combines had this type power steering ou not. They would be the newest that might have it. I made another post relative to comment on my Struck on our other Farmall thread posting.

Harold H

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy