Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

F-20 brake seals

Welcome Guest, Log in or Register
Author 
John in Ne.

11-12-2003 19:19:54




Report to Moderator

Has anybody tried to replace these seals with a more conventional or automotive type of seal?If one could be found the right size, it looks like it would do a better job. The brakes on the F20 I am working on were soaked with rear-end grease. Thanks,John.




[Log in to Reply]   [No Email]
Old Guy

11-13-2003 10:52:36




Report to Moderator
 Re: F-20 brake seals in reply to John in Ne., 11-12-2003 19:19:54  
While I had my brakes apart, I just made a gasket out of cork and installed that behind the entire housing. I havent got the motor running yet so I cant say for sure if it works.



[Log in to Reply]  [No Email]
F-Dean

11-12-2003 20:03:34




Report to Moderator
 Re: F-20 brake seals in reply to John in Ne., 11-12-2003 19:19:54  
I drilled a small hole in the bottom of the brake cover to let the oil escape.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy