Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
Order Farmall Cub Parts Online

Farmall cub bearing sizes

Welcome Guest, Log in or Register
Author 
Michael DeGroot

11-10-2003 17:40:42




Report to Moderator

I have a 48 cub that I am restoring and am having some problems with the rod and main bearing sizes. The mains are 020us and the rod bearings that I took out were std. There is quite a bit of play there for the rods and I don't think it should be like that.I mic'd the rod's at 1.473,1.482, 1.478 1.485. Can anybody tell me if my rod bearins should be 020us also? When I started it there was quite a knock in it. so I shut her down again

[Log in to Reply]   [No Email]
parts man

11-10-2003 21:14:13




Report to Moderator
 Re: Farmall cub bearing sizes in reply to Michael DeGroot, 11-10-2003 17:40:42  
Michael, you need to take your crank to an engine rebuilder and have the crank turned, they will then tell you the correct size bearings to get. They will likely have them too.

If you find you need any more parts you can contact me, I have a lot of cub parts.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy