Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Farmall 350 Bore size?

Welcome Guest, Log in or Register
Author 
Dan

10-19-2003 13:49:17




Report to Moderator

Can someone tell me the OD of the sleeves for a Farmall 350. What I would like to find a set of pistons that would fit the bore after the sleeves are removed. I can bore if needed. Has anyone tried this? If so what pistons did you use?
Thanks Dan




[Log in to Reply]   [No Email]
John Reed

10-19-2003 17:52:46




Report to Moderator
 Re: Farmall 350 Bore size? in reply to Dan, 10-19-2003 13:49:17  
HI Bill ,I just miked my old sleeves and they are 3.750 if thta helps/ I am trying to find a set of flathead pistons for stock sleeeves for my 350. John



[Log in to Reply]  [No Email]
Dan

10-21-2003 18:28:03




Report to Moderator
 Re: Re: Farmall 350 Bore size? in reply to John Reed, 10-19-2003 17:52:46  
Thanks John, the 3.750 is the info. that I needed.
Dan



[Log in to Reply]  [No Email]
Ohio Bill

10-19-2003 17:26:58




Report to Moderator
 Re: Farmall 350 Bore size? in reply to Dan, 10-19-2003 13:49:17  
I would not try this. Sleeves are there for a reason. I don't know how thick the wall is between the sleeve and the water chamber, but you run the risk of puncturing this wall. I recently removed sleeves from a 400 and found them very thin. You would not gain that much more displacement anyway.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy