Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Hey Guy and KellyC......3pt bracket

Welcome Guest, Log in or Register
Author 
TP from Central

10-17-2003 14:24:52




Report to Moderator

Guy, I R&D'ed your design..... ....Or "Ripped Off and Duplicated" your design..... I am really amazed at how much room is possible by just rotating the cylinder!!!!! ! I would have never thought of it in a million years!!!!! ! I owe you a thanks for posting that picture of you 300's setup!!!!!

Here is the one I made on our 400..... ...I didn't drill another hole in the 3pt, but I ran a piece of flat stock I found at the junk yard(along with the other metal) up to the top bolt on the axle housing..... ..... ...I really would have like to make it with heavy angle iron, but I couldn't find any that I liked..... Here is a link to it..... ...

http://redpowermagazine.com/cgi/yabb/YaBB.cgi?board=news;action=display;num=1066420605;start=0

[Log in to Reply]   [No Email]
Guy

10-17-2003 16:45:28




Report to Moderator
 Re: Hey Guy and KellyC......3pt bracket in reply to TP from Central PA, 10-17-2003 14:24:52  
Looks great, glade I could help by sharing my ideas. Nice looking tractor to. Hey be careful with that saw, those things scare me ever since I blade came off my uncles sawmill powered by the belt pulley from his H. I had a front mounted saw I just gave away this week. Was on a tractor I bought a few years ago.



[Log in to Reply]  [No Email]
TP from Central PA

10-17-2003 17:57:21




Report to Moderator
 Re: Re: Hey Guy and KellyC......3pt bracket in reply to Guy, 10-17-2003 16:45:28  
That saw comands respect..... ..... Nothing to operate when feeling anything less then "Well".....

That old 400 was really rough when we bought it..... ....It still isn't 100% the way I would like it, but it gots to earn a living ;-P

Thanks Again
TP



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy