Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Charlyn power steering on Super M

Welcome Guest, Log in or Register
Author 
TODD

10-04-2003 08:12:14




Report to Moderator

I have purchased a complete power steering kit for my Super M. I installed the bottom pulley on the crank but found that the pump will hit the fan. I also noticed the fan shroud has to be trimmed. How can the fan be spaced and will the radiator have to be removed?




[Log in to Reply]   [No Email]
bbauman

10-04-2003 08:32:06




Report to Moderator
 Re: Charlyn power steering on Super M in reply to TODD, 10-04-2003 08:12:14  
My Super M has nuts used as spacers between the pulley and the fan to move it forward. Nuts are a size larger than the bolt, shouldn't have to remove the radiator. I had to trim the impeller driver springs down to almost half so the impeller driver would go over the water pump shaft correctly.

Not sure which PS setup I have but thats the way mine is done.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy