TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

farmall A pto size

Welcome Guest, Log in or Register

Author

Peter Hatlestad

08-31-2003 16:49:37

Report to Moderator

I have a '39 Farmall and a '40 Farmall B. I noticed that the PTO shaft for the '39 is at least '1/4 smaller than the '40 B. Was that common? I want to use the '39 to pull an auger to load my bins but it can't run any because the pto shaft is to small.

Is there an adapter or do I have to find a pto shaft from a B or a C to fix this?

Thanks,

Pete

[Log in to Reply] [No Email]

Dave_Id

08-31-2003 17:17:36

Report to Moderator

Re: farmall A pto size in reply to Peter Hatlestad, 08-31-2003 16:49:37

The A & B are identical. The early Farmalls all, (did I say all? I think) had 1 1/8 pto shafts into 1941. At some point they becames standardized thruout all tractors and all became 1 3/8 diameter. You can buy an adapter at any farm store, I recommend the style with a runon clutch to use with a brush hog. About $50 for this style, but well worth the extra safety factor.

[Log in to Reply] [No Email]

Pete

09-01-2003 13:03:00

Report to Moderator

Re: Re: farmall A pto size in reply to Dave_Id, 08-31-2003 17:17:36

Thanks for the info... Pete

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy