Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

carb. help

Welcome Guest, Log in or Register
Author 
pete

08-04-2003 17:33:10




Report to Moderator

1940 farmall a. when tractor is under a load and
when the governor responds to the carb. needs ,the
carb. starts sputtering as though it is running
flooded. the rubber tipped needle valve, when i took the carb. down is hanging up in the close
position. would this cause the sputtering and what
can i do to fix it.




[Log in to Reply]   [No Email]
Lee

08-04-2003 23:58:31




Report to Moderator
 Re: carb. help in reply to pete, 08-04-2003 17:33:10  
Pete,
If your needle valve is really sticking, I would just replace it. I would go to my local Case dealer and buy a valve and seat. I think they are around $5.00. If you have a way to really clean the carb, I would recommend putting a whole rebuild kit in it. Those are about $30. I have done many of these and I would be happy to do yours for you if you would like for a fair price. Send me an email if you want. lsackett@iname.com

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy