Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Engine specs for M ?

Welcome Guest, Log in or Register
Author 
Bill Smith

07-31-2003 09:29:21




Report to Moderator

Going back together with the engine on the M. I checked out the info there under torque specs and tune up specs on this site. I got quit abit of info there. Just missing a couple things. What is the torque spec for the rocker arm assembly? Also, what is the exceptable clearance for Rod and Main bearings? And lastly, is 100 ft. lbs for the main bearing cap bolts, and 60 for the rods sound right? That is what is posted on this site, but they seemed a little tighter than that when taking it apart. Post any info you can and thanx in advance.

[Log in to Reply]   [No Email]
Mike ISW

07-31-2003 13:11:01




Report to Moderator
 Re: Engine specs for M ? in reply to Bill Smith, 07-31-2003 09:29:21  
rocker arm assm.= 30-35 ft. lbs. if 3/8" bolts and grade 8. Rod caps=53 ft lbs. Mains=100ft lbs. Clearances=rods-/.002-.003". Mains=.002-.003". If you have a diesel these are wrong. This are for a gasoline "M".



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy