Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

what is the plow size on a IH 140 double plow?

Welcome Guest, Log in or Register
Author 
jeff

07-17-2003 13:26:18




Report to Moderator

What is the plow size (12"?) on a double fast hitch plow?




[Log in to Reply]   [No Email]
Hugh MacKay

07-18-2003 02:45:55




Report to Moderator
 Re: what is the plow size on a IH 140 double plow? in reply to jeff, 07-17-2003 13:26:18  
Jeff: The 1 point fast hitch plow for a 140 most likely can be set for 10", 11", 12" or 14". However there are 2 different size bottoms. My plow has the narrower bottom and will work at 10, 11 or 12. I tried it at 14 and it will not plow very well that way. I understand the larger bottom can be used set at 12 or 14. My brother has the same plow as I for his 230. The same frame is used for 2 point plow for 230, etc. The pull beam turns into a Y at front of plow giving 2 point. I have my doubts the wider bottoms were ever sold on the single point units.

I wouldn't say never, as if I wanted to hitch onto my brothers plow all I would need to do is change pull beam. Also the bottoms for his plow will bolt right on my frame. His plow bottoms are about 2" wider than mine at point where bottom mounts to plow frame. The angle and curve of mold board are different also.

[Log in to Reply]  [No Email]
Bus Driver

07-17-2003 18:45:45




Report to Moderator
 Re: what is the plow size on a IH 140 double plow? in reply to jeff, 07-17-2003 13:26:18  
I have one but it is several miles away at the moment. Most likely is 2 -14's. But certainly not larger than that.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy