Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

300 Utility Tractor

Welcome Guest, Log in or Register
Author 
Adrian

07-10-2003 16:45:15




Report to Moderator

Gentlemen, I am looking at a 300 Utility. Paint is rough,front grill bad(do not know where I would ever find a replacement),lights missing,wire gone.It was recently overhauled 2000,used very little since. Fast hitch,also 3-point,TA works excellent,tack functioning. The pto is constantly turning. Is this fixable? Cost? Bottom line, what is it worth? I live in Wisconsin. Also, the rear tires are bad.

[Log in to Reply]   [No Email]
LanceM

07-10-2003 17:17:44




Report to Moderator
 Re: 300 Utility Tractor in reply to Adrian, 07-10-2003 16:45:15  
Going from the worst, PTO, sounds like an adjustment, there is a small cover on the pto that has two adjustments, pto clutch and pto brake, sounds like they need adjusted so the brake stops the pto in the off position. If it has been used for a long time out of adjustment the bands may be worn out. I've never had that apart on mine but I don't think it would be difficult to fix or that expensive.

I think a grill from a 300 or 350 will fit so that's not that big of a deal. Paint is cheap if you do it yourself. Lights are available as are new wiring harnesses, or another DIY project with new wire.

Rebuild in 2000 means what??? Does he have recipts showing what was replaced/rebuilt?

Does it have power stearing and hydralics?

New tires will be around $400-600 or more I would guess, you may be able to find some good used ones for less depending upon what you plan to use it for.

My guess to value would be in the $1000 - $1400 range, figuring that if it was painted, replacement grill, lights and wiring, and good tires it could probably bring $2000-2400 in Northern Indiana. For me alot would depend upon what was done durning the rebuild, engine, clutch, t/a??? The more that was done the more I would expect to pay....

I bought mine 20 years ago for $1600, it needed paint and some TLC, 20 years later it's on it's second paint job and I've probably put $500-600 of parts into it over the years. It smokes a little and leaks a little but not enough to take it out of service for an overhaul. Heck of a tractor! It always starts and always gets the job done...

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy