Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Farmall 560 Power steering please help!!!

Welcome Guest, Log in or Register
Author 
big red 1

06-25-2003 07:01:55




Report to Moderator

Well I first viewed the archives and found nothing applicable to this.
I have a 560 rowcrop narrow front just replaced all hytran and filter.The steering is a problem Driving straight no problem it is when you go to turn there is about 3 inches before it hits a hard spot in the steering once you muscle thru that you have power steering on the way you were turning returning to drive straight it is the same deal,and this problem is identicle if you go to turn left or right,any ideas on how to fix?as always thanks in advance,by the way thanks to you folks I did get the pto fixed and the fast hitch cylinder working,looks like all I got left is the steering before the loader goes on
thanks

[Log in to Reply]   [No Email]
Aces

06-25-2003 08:00:29




Report to Moderator
 Re: Farmall 560 Power steering please help!!! in reply to big red 1, 06-25-2003 07:01:55  
First thing is to make sure the steering shaft is not tight because the shaft comeing out the back of bolster houseing must move in and out to open the hydraulic valve, I would check that with the engine off just rock the steering shaft back and forth to see if the shaft moves in and out.It should move in the splines of the u joint but if that spline is rusted tight there is a ste coller under the hood that you can move away from the housing to fix that. If you find things ok then I would think it would be in the bolster there is a ball rack and pion in the steering rack it could be bad I would not think it would be the rack gear or the bolster shaft because say it is the same right or left. hope this helps

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy