TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Super C Finished! - Picture

Welcome Guest, Log in or Register

Author

Skycarp

06-14-2007 12:05:21

Report to Moderator

Got her done! Pictures don't show the amount of work that goes into a complete restoration of an old piece of farm equipment.

Thanks for all the assistance given to me by you folks here on the IH forum. This is my first IH and I couldn't done it without your help.

[Log in to Reply] [No Email]

Cmore

06-14-2007 21:37:44

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

Looks great except for that somewhat morphodite single front wheel...put a real front end under it and it'll be just great!! Cmore

[Log in to Reply] [No Email]

Skycarp

06-15-2007 07:59:39

Report to Moderator

Re: Super C Finished! - Picture in reply to Cmore, 06-14-2007 21:37:44

Haw haw haw. I'll work on that in my next life.

[Log in to Reply] [No Email]

don grodeon

06-17-2007 12:37:30

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-15-2007 07:59:39

tractor looks great but in the pic it looks like u put rear wheel weights on backwards also where did u find the front frame weights i would like a pair

[Log in to Reply] [No Email]

Dave BN

06-14-2007 20:31:07

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

Very Nice. And yes the wheel weights should be on the other side out. You will find a square recess for the heads of the square head bolts, that were origional, to fit into. Dave

[Log in to Reply] [No Email]

Skycarp

06-14-2007 21:16:17

Report to Moderator

Re: Super C Finished! - Picture in reply to Dave BN, 06-14-2007 20:31:07

OK, thanks.

[Log in to Reply] [No Email]

Thomas D Windsor

06-14-2007 19:03:15

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

I failed to ask. Where are you located. We don't have background around here like that in the photo!!! :-)

[Log in to Reply] [No Email]

Skycarp

06-14-2007 20:15:38

Report to Moderator

Re: Super C Finished! - Picture in reply to Thomas D Windsor, 06-14-2007 19:03:15

Well, we are in southern Utah at 5000 foot level. We are in a transition area between desert and mountains. Not too much farming going on here.

Thanks,

[Log in to Reply] [No Email]

S/C Bob

06-14-2007 17:47:38

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

Fantastic!!!

[Log in to Reply] [No Email]

markloff

06-14-2007 17:35:39

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

Looks real nice but...why are the rear wheel weights on backwards? Funny thing is I bought my Super M with them on backwards also. Good job.

Mark

[Log in to Reply] [No Email]

CNKS

06-14-2007 19:13:56

Report to Moderator

Re: Super C Finished! - Picture in reply to markloff, 06-14-2007 17:35:39

I think he has the wheels dished in, in which case it probably doesn't make much difference. With the wheels dished out, they fit better convex side in. It's whatever a person likes.

[Log in to Reply] [No Email]

Farmer Bob

06-14-2007 21:48:57

Report to Moderator

Re: Super C Finished! - Picture in reply to CNKS, 06-14-2007 19:13:56

C's and SC's don't have dished hubs. They are flat.

[Log in to Reply] [No Email]

CNKS

06-15-2007 09:57:55

Report to Moderator

Re: Super C Finished! - Picture in reply to Farmer Bob, 06-14-2007 21:48:57

NO, they are not like the H/M, etc, but they are not absolutely flat.

[Log in to Reply] [No Email]

Skycarp

06-14-2007 18:04:04

Report to Moderator

Re: Super C Finished! - Picture in reply to markloff, 06-14-2007 17:35:39

I am not sure what you mean by the weights being on backwards? They are flat on one side and tapered on the other. The tapered side looked better facing out. Oh well, I guess you can learn something every day.

Thanks for the comments.

[Log in to Reply] [No Email]

RayP(MI)

06-14-2007 16:53:58

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

NICE!

[Log in to Reply] [No Email]

El Toro

06-14-2007 15:08:50

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

Probably looks better than when new with that nice paint job. A lot of work went into this to look this good. Hal

[Log in to Reply] [No Email]

KIP in MX

06-14-2007 14:39:31

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

Nice job! Taking the photo in a hay field adds just the right touch.

[Log in to Reply] [No Email]

Thomas D Windsor

06-14-2007 14:24:56

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

Excellent work.

[Log in to Reply] [No Email]

City-Boy McCoy

06-14-2007 13:39:13

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

Absolutely beautiful. Well done. Congratulations on a fine job. mike

[Log in to Reply] [No Email]

Brian in NY

06-14-2007 13:38:25

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

What a beauty! Great job, you should be proud.

The hard work does show by the way!

[Log in to Reply] [No Email]

Tim...OK

06-14-2007 12:36:40

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

Beautiful,hope my `53 Super C turns out have that nice..

[Log in to Reply] [No Email]

georgeky

06-14-2007 12:29:56

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

Great job, it looks fine.

[Log in to Reply] [No Email]

Andy Motteberg

06-14-2007 12:29:41

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

Nice tractor. I have not seen many Super C's with the single front wheel so I don't know, is that front wheel fork suppose to be at a slant like that or not??

[Log in to Reply] [No Email]

Janicholson

06-14-2007 12:10:07

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 12:05:21

Nice to the max. Great background, reminds me very little of Minnesota. JimN

[Log in to Reply] [No Email]

Skycarp

06-14-2007 13:38:13

Report to Moderator

Re: Super C Finished! - Picture in reply to Janicholson, 06-14-2007 12:10:07

Yes Jim, I have flown into Minn and was amazed at all the water you have to deal with. I am in southern Utah and we do not have a lake in every backyard.

The red sandstone cliffs in the background of the picture are the signature of this area. The area is called The Color Country. We are a tourist area with the Grand canyon North Rim, Bryce Canyon NP, Zion Canyon NP, Glen Canyon NRA (Lake Powell), Canyonlands NP, Grand Staircase Escalante NP, in about an 90 mile radius. We stay off the streets in the summer, and hold dances on the streets in the winter.

Thanks for the comment.

Dean

[Log in to Reply] [No Email]

Janicholson

06-14-2007 13:58:46

Report to Moderator

Re: Super C Finished! - Picture in reply to Skycarp, 06-14-2007 13:38:13

I'm a westerner, Kodachrome basen Very sweet. Jim

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy