trying again

everytime I paste the image from tractor photo in gallery to the optional image url and then submit, a little tiny window with a red x in it shows up instead of the photo....I give up!

When you post a photo, go to your photo and right click it and then click "Properties". Highlight and copy the address (U R L). Then close the properties window and Paste the U R L into the Optional Image U R L box when you post a new message.

Hope you can get it figured out.

Andy.

It is because you only have part of the U R L. It should be a longer U R L like this:>Link

Your>Link U R L is:

Link

There should be numbers behind to show the photo. You need to copy the ENTIRE U R L and paste it. If you use a valid U R L with the numbers behind, it should show up like the photo of my tractors.

Good luck.

eureeka it worked