Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Sleeves for M

Welcome Guest, Log in or Register
Author 
F Morski

06-07-2007 09:06:50




Report to Moderator

What is the biggest sleeve hat is available for an M block. I want to punch out my M to as large a CID as possible.
Just learning about the M so any info is appreciated.




[Log in to Reply]   [No Email]
georgeky

06-07-2007 11:20:31




Report to Moderator
 Re: Sleeves for M in reply to F Morski, 06-07-2007 09:06:50  
Chances are your M already has 4 inch pistons in it. Most of them have been rebuilt with over bore kits. As stated 4 inch is as large as you can go without roboring the block.



[Log in to Reply]  [No Email]
El Toro

06-07-2007 09:23:28




Report to Moderator
 Re: Sleeves for M in reply to F Morski, 06-07-2007 09:06:50  
You can go to 4.00" pistons and sleeves without machining the block. That will give you the 264 cid bore that's the same as the Super M. It will be more than enough to create wheel slippage. Hal



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy