Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Scotty

Welcome Guest, Log in or Register
Author 
SuperA-Tx

05-23-2007 09:52:01




Report to Moderator

You talking about this clip on the rockshaft arm? This is on our 140 but its the same on a SA.

Small pin is Case # 439-1426
Spring is Case # 3501444R1
Key is Case # 350142R1
Bar is Case # 350188R2

The Key is the 1/2 inch bolts but you can take a 3" hex head bolt and cut it off and grind the head down to make it work if you have a pattern for the bolt. If you buy them from Case they are $17 each.

The bar is the oblong part you see in the pic. Price at Case is $22.27.

Spring is $4.28 and pin is $2.17

If this isnt the part you were talking abut let me know.

third party image

[Log in to Reply]   [No Email]
scotty

05-23-2007 11:02:38




Report to Moderator
 Re: Scotty in reply to SuperA-Tx, 05-23-2007 09:52:01  
Yep thats what Im talkin about ! So the bar is on the outside of the rockshaft arm ! I have the 1/2" pins and the small pin with the springs, just tryin to figure out how the heck it works :")
OK I think Im gettin it, that plate goes over the rounded heads going through the arm to keep pressure on them ? OK I think Ive got it, the blue ribbon service manual doesnt show a very good picture of that assembly ! And I took it apart so many years ago, I forgot how it went together :"(

Thanks Again,scotty

[Log in to Reply]  [No Email]
SuperA-Tx

05-23-2007 12:08:20




Report to Moderator
 Re: Scotty in reply to scotty, 05-23-2007 11:02:38  
I think you got it.

Put the small pin in with the rocker arms seperated, that along with the spring. Then add the clip and the cotter key. The clip turns where you can add the bolt and attachments without having to take it all apart.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy