Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Timing on 350 farmall

Welcome Guest, Log in or Register
Author 
Dave S.

04-06-2007 20:51:03




Report to Moderator

I put a 300 farmall engine with 350 sleeves and pistons(complete overhaul top to bottom) in my H and need specs for setting the timing. There are three marks on the front pulley, I know the single mark is TDC but which one of the two close together is used as the timing point. I had it running and set the timing to the one with the most advance about 28 degrees. I don,t have a manual for the 300 or 350. Dave

[Log in to Reply]   [No Email]
PORKY B.

04-07-2007 08:30:07




Report to Moderator
 Re: Timing on 350 farmall in reply to Dave S., 04-06-2007 20:51:03  
First off the timing marks-degrees Jossete gave are not even for a 300-350 Farmall.



[Log in to Reply]  [No Email]
Jossette

04-07-2007 06:02:15




Report to Moderator
 Re: Timing on 350 farmall in reply to Dave S., 04-06-2007 20:51:03  
TDC

16

25

30

40



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy