TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

400 parts help

Welcome Guest, Log in or Register

Author

karl f

04-01-2007 01:43:43

Report to Moderator

local dealer was no help last year. they said "NLA"
i need the gaskets on the top of the hydraulic reservoir on a 400 farmall. someone at a dealer please contact me. thanks :) new pump is cavitating/growling. gaskets should solve it. or at least stop the oil leaks :)
320. 266 nineteen fifty six.
-karl f

[Log in to Reply] [No Email]

JayWalt

04-01-2007 09:14:16

Report to Moderator

Re: 400 parts help in reply to karl f, 04-01-2007 01:43:43

you can easily make a gasket from gasket material, not very difficult. If your pump is growling, check the filter, i dont know where it is on a 400, but it is the most likely cause of the pump growling, either that or air getting into the suction like from a bad oring, or a crack in the pump housing/hoses

[Log in to Reply] [No Email]

karl f

04-01-2007 12:53:08

Report to Moderator

Re: 400 parts help in reply to JayWalt, 04-01-2007 09:14:16

pump is new, "filter"(screen) is new. the reservoir cover gaskets and possibly an o ring at that mount point are the last defect in the system. the return and suction lines both are on that top assembly the gaskets seal, along with the valve bodies. definitely a high pressure leak there, so likely a suction leak too.
karl

[Log in to Reply] [No Email]

Jossette

04-01-2007 14:33:19

Report to Moderator

Re: 400 parts help in reply to karl f, 04-01-2007 12:53:08

there are 4 bolts on the right side of the reservoir at the bottom--this is the filter and it is probably pluged up tight. I'll try and put a pic up ..

[Log in to Reply] [No Email]

Jossette

04-01-2007 14:37:07

Report to Moderator

Re: 400 parts help in reply to Jossette, 04-01-2007 14:33:19

I believe you need # 18 in pic. send me an email if you need a bigger pic...and numbers

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy