TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

1066 dual wheels

Welcome Guest, Log in or Register

Author

Rickyp

03-27-2007 20:56:17

Report to Moderator

My tractor has 18.4 x 38 on it. The duals that were bought for me are 20.4 x 38. Are these the same height? Will they work on my tractor? What benefits will I get from the duels. Will this put more stress on the rearend and transmission? Thanks, Ricky

[Log in to Reply] [No Email]

Hugh MacKay

03-28-2007 03:01:22

Report to Moderator

Re: 1066 dual wheels in reply to Rickyp, 03-27-2007 20:56:17

Rick: You certainly don't want those 20.8 on the outside. It will work fine with 20.8 on inside and 18.4 on the outside. I would prefer same size inner and outer but you may as well wear out what you have. You might try and add, just never know who may be wanting to trade some tires.

I think if you look through 1066 manual, it will advise you not to use 3 lowest gears for maximum drawbar pull. Also don't load that tractor with excessive weight while using duals. That rear end does have a limit.

I bought a new 1066 with tires loaded and wheel weights. My complaint that first year, doing tillage the tractor would leave huge wheel tracks that were not very nice to plant on. The tractor did not have the kind of traction I expected. When the tractor was one year old, I dumped the chloride, took off the wheel weights. I then added duals giving two sets of 20.8 tires. That tractor actually pulled the cultivator easier and no more of those damn wheel tracks.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy