TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

F12/14 Manifold Gasket

Welcome Guest, Log in or Register

Author

Fawteen

03-18-2007 11:03:33

Report to Moderator

Doing a little update on a 10 year old rebuild of my F14. One part of the project is to replace the leaking manifold gasket. Got the manifold off this afternoon, and 3 out of four of the exhaust ports had chunks blown right out of the gasket.

When I rebuilt the motor, I used the one-piece fiber gasket that came with the kit. New manifold, new head, new studs, brass nuts, all torqued down good and rechecked after a couple of heat cycles on the engine. Ordered a replacement gasket from Rice Equipment, same deal, plain fiber gasket.

Dunno if something is warped or if I just didn't reef it down tight enough, but all the intake ports looked fine.

Is there a heavier duty gasket available? Maybe something with metal crush rings around the exhaust ports?

[Log in to Reply] [No Email]

03-18-2007 15:39:12

Report to Moderator

Re: F12/14 Manifold Gasket in reply to Fawteen, 03-18-2007 11:03:33

Put a straight edge on the gasket surface of the head and manifold to check for warpage. A framing square would work.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy