TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Super M with 3 point hitch

Welcome Guest, Log in or Register

Author

w6 tractor

03-11-2007 07:46:46

Report to Moderator

I have had a Saginaw 3 point on my '53 Super M for three years. I use a grader blade and 6 foot Bush Hog. It works great! Is this hitch/tractor combination useable with 3 point plows e.g. 3 point moldboard, 4 row cultivator etc.? Any issues with axle housing breakage where the 3 point attaches? Thanks

[Log in to Reply] [No Email]

Hugh MacKay

03-11-2007 08:09:12

Report to Moderator

Re: Super M with 3 point hitch in reply to w6 tractor, 03-11-2007 07:46:46

w6 tractor: Axle housing breakage will never be an issue, Super M can't get enough traction to break those.

It will plow fine if your just doing a few acres, as you will find yourself doing manual corrections. That might get rather exhausting on 50 or 100 acres. I expect you could install a depth wheel on the plow. One problem you'll run into with plowing is tractor wheel tread. 2 bottom mounted plows require a wheel under 60" and that is quite narrow for an SM. 3 bottom mounted will allow you to set wheels 66" to 72" and that is where automatic draft control would help for traction. Since SM quite handily pulled 3 bottom trailer plows, if you have 3 bottom with a gauge wheel, it should work.

Cultivator will work great with gauge wheels.

[Log in to Reply] [No Email]

w6 tractor

03-13-2007 04:23:07

Report to Moderator

Re: Super M with 3 point hitch in reply to Hugh MacKay, 03-11-2007 08:09:12

Thanks, Hugh. I was concerned about the load on the axle housing. Glad it won't be a problem.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy