TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

W-6 fix,s

Welcome Guest, Log in or Register

Author

kirk in ks,

03-03-2007 14:29:16

Report to Moderator

Will oart,s welded on to the front awxle come off with grinding?
someone welded little angled piece,s of metal to each side of the top of the axle when that loader was on there,
upside down angled inch wide angle iron under front spring,s,
Now I wanna cut them off, and I dont have a welder, I do have a new hand held grinder though,
maybe that will work,
Im hoping that I dont have to redo that hyd pump on there as it got hot before cause of low fluid,just put a return line on and i think that would do it,
If there,s an IH person that want,s to see this perdickament,
then give me yur Email and Ill e mail these pic,s to you and you can see what im dealing with,

[Log in to Reply] [No Email]

Ron in Nebr

03-03-2007 17:59:34

Report to Moderator

Re: W-6 fix,s in reply to kirk in ks,, 03-03-2007 14:29:16

I have no clue what an "oart,s" is.....but if it's welded to your front axle, yeah, it can be ground off....a torch would make it a much faster job, but a grinder will do it too, eventually. Make sure ya don't grind any deeper than flush with the surfact of the axle.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy