Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

B414 remote hydraulics

Welcome Guest, Log in or Register
Author 
Elbert Hammie

02-24-2007 05:37:35




Report to Moderator

Greetings, I recently purchased a B414 Diesel; non-power steering, that is in pretty fair shape. I am still in the learning stage with this tractor. Can some tell me how to go about installing remote hydraulics on this machine.




[Log in to Reply]   [No Email]
Fromjb2

02-24-2007 08:45:54




Report to Moderator
 Re: B414 remote hydraulics in reply to Elbert Hammie, 02-24-2007 05:37:35  
Hi, there was an optional remote hydraulic outlet available from IH. It was an "L" shaped pipe with a hydraulic quick coupler on one end and a banjo fitting on the other. The banjo fitting was connected to one of the hydraulic plugs in front of the seat. The only problem was it was single acting cylinders and was controlled by the 3pt hitch raise/lower lever after turning one of the valves in front of the seat. Therefore could not use 3pt and remote together.

If you want double acting cylinders then you have to install external hydraulic control valves by connecting into the high pressure line from the hydraulic pump. The IH 1500 Series front end loaders that fit this tractor were connected in this manner.

JimB

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy