TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Farmall H Remote Control Valve/ Aux. Control Valve

Welcome Guest, Log in or Register

Author

John in Ct

02-21-2007 09:46:55

Report to Moderator

I am working on a Remote Control Valve/ Aux. Control Valve ( converts one way hyd into two way)for my Farmall H. My questions, how do you adjust the 2 nuts on the spool? Is the control rod that is used with it the same diameter as the Lift-All control rod? Mine is worn so I want to make a bushing. Thanks!!

[Log in to Reply] [No Email]

PatMz

02-21-2007 11:26:16

Report to Moderator

Re: Farmall H Remote Control Valve/ Aux. Control V in reply to John in Ct, 02-21-2007 09:46:55

The control rod on my M aux valve is the same diameter as the liftall rod.

I'm not sure what nuts you're referring to, I don't recall any adjustments. The parts lists for the two are identical, except for the brace to the gas tank bolt.

Is this the dude?

third party image

[Log in to Reply] [No Email]

Mark Johnson

02-21-2007 16:02:16

Report to Moderator

Re: Farmall H Remote Control Valve/ Aux. Control V in reply to PatMz, 02-21-2007 11:26:16

A little off topic but how did you get the parts printed and copied so well to the forum?Thanks
Mark

[Log in to Reply] [No Email]

PatMz

02-22-2007 05:16:04

Report to Moderator

Re: Farmall H Remote Control Valve/ Aux. Control V in reply to Mark Johnson, 02-21-2007 16:02:16

I used the CNH online parts search:

Click Here!

Then I copied the picture and uploaded so I could link to it.

[Log in to Reply] [No Email]

John in Ct

02-21-2007 12:29:33

Report to Moderator

Re: Farmall H Remote Control Valve/ Aux. Control V in reply to PatMz, 02-21-2007 11:26:16

Thanks for Replying!!! That is the valve. The 2 nuts that I am not sure how to adjust are #6 in the diagram.

[Log in to Reply] [No Email]

D Slater

02-21-2007 14:39:38

Report to Moderator

Re: Farmall H Remote Control Valve/ Aux. Control V in reply to John in Ct, 02-21-2007 12:29:33

To adjust if all the lines are out of ports I think you can look through rear ports and tell when spool is in center. If its on tractor adjust until you get pressure at one port then the other by moving lever the same distance from center. You can adjust with rear ports dead headed,just listen to engine start to labor.

[Log in to Reply] [No Email]

PatMz

02-21-2007 14:23:05

Report to Moderator

Re: Farmall H Remote Control Valve/ Aux. Control V in reply to John in Ct, 02-21-2007 12:29:33

I'm sitting her tapping my foot waiting for Allan, Hugh, Bob M and the other people who really know to chime in.

The names of those parts are:
4 AUXILIARY CONTROL VALVE CENTERING SPRING 5 AUX. CONTROL VALVE CENTERING SPRING WASHER 6 AUX. CONTROL VALVE CENTERING SPRING SPACER 7 AUXILIARY CONTROL VALVE CENTERING SPRING LOCK

Looks like you adjust that nut so the spring returns the valve to center, i.e., no fluid moving through either hose. All the parts are "retired", so don't do what I usually do in these situations and drop a little piece in the shop floor debris!

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy