TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Case 1150 Hydraulic lock up on tilt after rebuild of cylinder.

Welcome Guest, Log in or Register

Author

Tim Duncan

12-05-2001 17:44:23

Report to Moderator

1150 B we replaced seals around the shaft of the left tilt cylinder. I drained the hydraulic fluid ( looked like water and leaves had gotten in it ? )changed 1 filter and washed out the screen filter. I put new oil in resivoir. I put my cylinder on dozer and DO NOT connect the hydaulic hoses to cylinder yet.I want to flush lines and the only way i could figure to do that is to start dozer and move controls to bleed line.... so i did. after about 2 or 3 real good squirts it stops. it quits squirting out fluid. and so i said ok lets hook it up and see what happens. after doing that i move controls and the only thing i s see move are the hoses connected to those cylinders. they are flexing but not too much. What could be wrong ?

[Log in to Reply] [No Email]

Max

12-05-2001 19:05:08

Report to Moderator

Re: case 1150 Hydraulic lock up on tilt after rebuild of cylinder. in reply to Tim Duncan, 12-05-2001 17:44:23

Those pumps sure do pump a lot of fluid quick, did you check the Hydraulic oil level? You didn't mention if you have the six way blade or the Power Angle Tilt (PAT) or ?? I went on a service call once when the customer complained that the tilt quit working on his six way. Quickest and easiest service call I had ever gone on, turned out that he rested his foot on the divertor valve and both cylinders were already fully extended. I don't believe that this could be your problem though it may be something just as simple. Them 1150B were some great machines in my opinion. Good luck.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy