TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

CASE 310 TerraTrac crawler project continues

Welcome Guest, Log in or Register

Author

Ken McWilliams

08-23-2001 04:08:39

Report to Moderator

I'm continuing to evaluate the CASE 310 that I just bought. It looks as though the most parts needed are in the area of the tracks.

I think I'll go with new sprockets, but the other parts I'll try getting used.

Parts needed:

Upper track support roller assembly including the shaft

Lower track roller assemblies including the shafts and blocks that mount them to the rails.

Links, pins, bushings: looks to be around 5 links needed and 2 master link assemblies.

Brackets that hold the front idle roller onto the rails.

If anyone has these parts in good shape for sale, please contact me.

Ken McWilliams
Dayton, OH

[Log in to Reply] [No Email]

wayne magarian

09-24-2001 14:42:42

Report to Moderator

Re: CASE 310 TerraTrac crawler project continues in reply to Ken McWilliams, 08-23-2001 04:08:39

Hi Ken.. I just bought a terratrac 300 at least that is what I was told. It has 4 rollers on the bottom none up top. The roller opening measures 3 1-2" flange to flange. The rear sprockets are about 1" wide and the chain pitch is 6" (center pin to center pin on the link). With the machine on the ground the chain rail is about 1" into the roller. If your 310 has similar measurements, I can check with the guy I bought it from to see if he has any parts or knows of any around. Supposedly ATC terratrac and the early case terratracs were the same machines since case bought out ATC.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy