Posted by T.C. in TX on March 03, 2011 at 06:19:27 from (24.153.226.6):
My son has found an intriguing opportunity. Only problem is what can we do with them??
There is a literal mountain of metal boxes. Maybe 500 of them available free or almost free. These boxes measure 2 feet wide by 4 feet long and 12 inches deep. The thickness is about 16 or maybe 18 gauge. Evidently they were used for storage of something in a manufacturing facility. Each does have a 6 inch or so angle iron type "handle" at the bottom ends on each end of the units. Those could be cut off for neat stacking.
Oh, I forgot to mention the top edge is rolled over which makes the top just a little wider due to the flange--maybe 1/8 inch wide at the top all around. I am thinking this could be an issue in stacking a lot of them if you tried to keep them all lined up.
So, we were discussing what could be done with these short of sending them to the scrap yard. The configuration makes them bulky to haul without crushing.
I was thinking maybe they could be stacked into walls (brick style) and welded/screwed together to make a building. See--instant storage inside. Course you would have to put some sort of sheathing on the outside (or caulk each joint) and then I am not real sure of how you would support the roof without a conventional post system.
So, what could be done with this find? Any ideas appreciated.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.