It depends on a number of things, including what your main is capable of supplying, the water pressure in the main, how long the various lines are in your system, how big they are and how long this 1/4 inch ID hose is. If it turns out that the 1/4 inch segment is the single greatest restriction in your system, it could be huge. Increasing the ID from 1/4 inch to 3/4 inch will increase the cross-sectional area by nine times, meaning potentially nine times as much flow!
Probably the restriction caused by the short 1/4 inch ID segment is relatively small compared to the pressure drop in the rest of the system. But I would certain try to replace it with something bigger. And for any long lines, such as those going to your tanks, one inch pipe is the minimum you should use. A 3/4 inch pipe has 2.25 times the cross-sectional area of a 1/2 inch pipe, and a one inch pipe has four times the area.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.