Posted by Matthew Blevins on April 02, 2009 at 07:05:50 from (216.77.85.3):
Hello everyone, I am new to the board. I just purchased a Ford 4000 HD Industrial Model 4140D (41400D serial 55481). This tractor has a messed up 4-speed transmission. The guy told me he was bushhogging with it and lost second gear, and kept using it until he locked the whole transmission up. I took the top cover off and looks like some teeth are missing on what I believe to be second gear. I am wondering the best way to replace the gear or gears. I think pulling the engine would be a good start, but what do you guys think? I have never rebuilt a transmission, but I am going to try. I do have access to a 801 transmission that has the same casting number, on a tractor I bought for parts, but don't want to tear it apart unless I have to. The 4140 does have the sherman transmission in front and the handle is broken off, could be from being cut off to fit under the steering arm, I don't know, but I couldn't get it to move, back and forth. Any info would be appreciated. Thanks Matt_G
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.