Posted by dave2 on January 28, 2009 at 02:12:30 from (139.139.35.70):
Hey folks,
The pictures aren't the best (I pulled them off the internet), but I hope you can see enough to understand what I'm asking and offer some advice.
Bottom line, I have a 3pt hitch dump container and need my hydraulics to lift higher to take advantage of the dump function. Was thinking of 2 possibilities.
1) if you look at the left picture just below the left upper lift arm, or the top of the right picture you'll see kind of rabbit ear (my imagination running wild) brackets.
Does anyone see a safety issue with unhooking the lower arms from where they are now (right picture) and hooking them in the upper brackets?
2) The next idea is to leave the lower arms as/is and shorten the links between the upper and lower arms. Thinking this would be the best, but don't know how low the upper lift arm will go without hurting anything internal.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.