Posted by Dave from MN on December 26, 2008 at 19:38:47 from (96.24.108.212):
Was able to get the 544D started today(was +32 deg), preheater isn't getting hot at all, gonna replace with a hotter circulating one now that I was able to get her in the heated shop area. Also need to see where I am sucking air in the hydraulics, think some one had mentioned something about hoses under the seat inside some where. That new to me (bargain) Lorenz blower I bought for the 1750D still doesn't throw the snow, BUT, comparing it to my JD, I think I am missing a access cover that is supposed to seal up the tractor side of the fan (or impeller), because there is a open circle about 60% of the size of the fan, my JD is sealed up. Maybe this (possible) missing cover is allowing to much air into the fan from the wrong side. Made a makeshift "panel" out of plywood to do a trial and see if it works. I will post pics of the issue at hand tomorrow and see what you all thing.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.