Tractor Talk Discussion Board |
1952 Ford 8N Wiring
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Terry B on June 28, 2007 at 22:04:32 from (24.64.223.204):
The 8N I bought had a non-functioning generator and regulator, so some previous owner removed or relocated associated wiring and ran directly off the battery (duh). I had the generator rebuilt and put in a new regulator, and am now trying to sort out the wiring according to a schematic I have. The schematic shows a wire coming from the coil to one post on the terminal block, then from there to an ignition lock ( I believe that's in the transmission?), from the ignition lock back to the other post on the terminal block where other wires tie in. But I can't find any wiring from an ignition lock - not sure I even have it. So can I just connect the wire coming from the coil directly to the post on the terminal block that contains the other wires?
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|