Tractor Talk Discussion Board |
Bent axle-update
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by coflyboy on April 24, 2007 at 13:18:10 from (71.221.101.95):
About a year ago I posted a question on this forum as to why the left front wheel on my Ford 641 was bent rearward (as in castor tilted rearward instead of forward) while the right one was straight. I advised at that time that the tractor had been picked up in a tornado and dropped on the left front wheel. Several of the good folks on this forum tried to help, but the unanswered question was how could the cast iron axle be bent but not broken since cast breaks instead of bending. As can be seen in the attached picture the culprit is the bolt holding the axle to the radius rod. It broke at the lower axle/radius rod junction causing the axle to bend rearward at the bottom. The spindle, of course, then would tilt rearward. I was almost too embarrassed to post this as I should have seen that broken bolt. I guess people tend to see what they expect to see. The reason for this post was to hopefully help others from missing this under similar circumstances. If the top of the bolt had also broken at the wrong time, bad things could have happened.
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|