Tractor Talk Discussion Board |
Re: Large Ditchwitch...feet per hour?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Turk on February 09, 2006 at 05:39:25 from (206.222.209.43):
In Reply to: Large Ditchwitch...feet per hour? posted by Markuss on February 08, 2006 at 17:59:37:
Lots of variables. If most of it is in a straight line you want a big machine. An operator would be handy too, they take a couple hours to master. The width of the ditch is the main thing speed-wise. In heavy NE clay at 42 in. deep my 50hp 4010 DW will run 12 to 14 ft. per minute digging 6 1/2 inches wide. Digging 50 in. deep and 12 in. wide it is more like 6ft. per minute. And be VERY CAREFUL, you will only trip and fall on that chain once. BillWhen someone calls for an estimate and tells me they are thinking about renting one, I always encourage them to go ahead and rent one to do it themselves, because they will usually never do it again.
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|