Tractor Talk Discussion Board |
Re: Removin' blade from bush hog
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Sid on February 25, 2005 at 21:49:02 from (12.156.150.186):
In Reply to: Removin' blade from bush hog posted by Bill Caldwll on February 25, 2005 at 18:51:24:
I have changed the blades a few times on several different Bush Hog brand mowers, and they all came off the same. The bolt is special made it is tapered and it has a key and slot affair. You do not have to hold it or have someone hold it because of this keyed bolt and slott on the bracket the blade goes on. I take the nut off that you are talking about, get a 2x2 piece of wood and drive the bolts out. I find a dry spot and block my machine up and crawl under to put them back in. I have done this myself without any help but it sure is easier and quicker with two people putting them back on. I guess I am lucky I have never had to torch any off. If you have a good stout hoist you can chain onto the tongue and stand the machine upright as I have seen some do. I do not have the facilities to do it this way, and think I can probably put a set on my ten footer about as quick as I can get it rigged up and lifted and secured to work on.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|