Tractor Talk Discussion Board |
Re: Double checking fill procedure.
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by txblu on June 18, 2004 at 05:54:25 from (199.46.199.232):
In Reply to: Double checking fill procedure. posted by Loren, Thanks Dave. on June 17, 2004 at 21:48:06:
Worked on a 300 for a friend once but don't remember the fluid fill access ports. When you said fill till it runs out, I want to clarify something for your benefit. If you have a fill port on the side of the main tractor housing and it is just below the centerline of the rear axles then what you said is probably true. (Course that would make filling awkward.) But if your fill port is on top of the housing, you have a full plug somewhere along the side of the housing that is approximately just below the center line of the rear axle. Gear trains and hydraulic systems(of which I am aware) do not run completely full of fluid. A power steering pump might run pretty close to full, but not the main tractor sumps, nor cars, nor trucks. Mark
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|