Tractor Talk Discussion Board |
B250 gearbox lube change?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by roy on May 05, 2004 at 07:16:18 from (47.248.0.43):
Hi.. A couple Q's re gearbox lube changing.. Q1 I have a B250 & was wondering about changing out the old gearbox lube. I had the PTO gear repaired a few years back & I think 80W90 gear oil is what is in there now.. Is that the best/proper fluid to use? Q2 How to get the right level? I noted three plugs, one one top right next to gear shift [for putting lube in], one at the bottom [presumably the drain] and a third just beside the right foot-plate on the frame right beside the brake pedal.... Is that the level to fill too? [close the drain after dumping old oil, refit drain plug & fill until oil starts coming out this port [on level ground I would assume]]? Like to do it right the first time! thanks in advance if anyone can advise!!! Roy
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|