Tractor Talk Discussion Board |
Re: Re: Re: Alternator
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John----LONG WITH PICTURE on February 18, 2004 at 23:01:37 from (66.157.25.218):
In Reply to: Re: Re: Alternator posted by stan on February 18, 2004 at 14:45:58:
The wiring of a Delco 10SI can be done in several ways depending on what accessories you have or want on your tractor. Do you have a amp. or volt meter? Do you have or want a idiot light? Do you want to spend the extra money to get a self energizing alt so you only need one wire? This is a typical wiring diagram. Since I do not know what you have or want I wiil just tell you how I wire it and if you need something else you can post back. First you will need a short 16 gauge jumper wire to go from the BAT terminal to the #2 terminal. Now you will need a 10 gauge wire to go from Bat. terminal to the battery side of the starter solenoid. You can mount a ammeter in this wire but I do not. If you got a low energized Alt. that is it. All of the 10SI Alt. will charge with this set up but if you do not have a low energized Alt. you will have to rev. the motor to get it to start charging. Once it starts it will charge at a idle. I do not like revving a cold motor or spending the extra on a low energized one. If you want to price one click HERE For a regular 10SI you will need to add the field wire. This is a 16 gauge wire that goes from the #1 post to a idiot light and then to the run side of the IGN. switch. If you do not want a idiot light you can use a one amp/50 volt diode. I use the idiot light since I do not have a ammeter. HOPE THIS HELPS
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|