Tractor Talk Discussion Board |
Re: Re: Why do JD engines go putt-putt?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Paul in Mich on February 14, 2004 at 07:34:38 from (68.188.227.110):
In Reply to: Re: Why do JD engines go putt-putt? posted by Roin 1456 on February 13, 2004 at 20:53:12:
Roin, I have to disagree with you in a sense. actually if you listen to a John Deere they dont go putt-putt. That would be one piston firing at point zero and the other firing at 180. A complete revolution is of course 360 degrees. If you look at the mag or distributor, I think you will see one contact at zero and one contact at 270. The mag or distributor is geared to rotate half the speed as the crank which means that one revolution of the crank is compression stroke, the other is power stroke, therefore the two cylinders are both firing on the same revolution and firing depending how you look at it 0 and 270 or 90 and 270. This makes the sound more like Putt-tut....Putt-tut....Putt-tut.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|