Tractor Talk Discussion Board |
Re: muffler pipe froze
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by michael/ms on October 18, 2003 at 19:57:33 from (209.205.137.197):
In Reply to: muffler pipe froze posted by SCOTT IN MO on October 16, 2003 at 19:19:49:
dont use wax.. we all know wd40 wont work.. get you some "PB BLASTER" it is better than liquid wrench and specially wd40 ever hoped of being... spray it on the area good come back a day or so later and do it again and a couple days later you should be able to break it loose with maybe a mild stroke with one of those impact nut drivers you hit with a hammer and it turns an 8th turn every time you hit it...the rule of life states if its is a chance you will ever need to remove a bolt one day thats in an environment of potential rust corrosion like exhast bolts ALWAYS wipe on antisieze compound BEFORE you screw the bolt in.... it saves ALOT of trouble down the road..manufacturers dont use it because they dont have to remove the bolt. YOU DO....
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|