Tractor Talk Discussion Board |
Re: Middle Buster
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by MikeH-Tx on September 09, 2003 at 20:03:32 from (24.175.2.192):
In Reply to: Middle Buster posted by PJW on September 09, 2003 at 18:12:30:
I tried the same thing with a combo plow I bought from Northern Tools. It was a middle buster plow or a ripper, depending on which of the two tools you connected to the 3 pt hitch. Plow works great. I found that the ripper would indeed dig a shallow trench that I could bury PVC into, but it wouldn't expel the dirt from the trench. So, you have to follow up the tractor work with manual labor. Not acceptable to me. I have opted ever since to rent a real trencher and do it right. Also, the trench was barely enough to bury the pvc. This means after a few years, some of the pvc is no longer buried. If not put under enough soil, the cycles of wet and dry will allow pvc with air inside to rise up to the surface.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|