Tractor Talk Discussion Board |
Melting fuses
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Paul (QC) on December 02, 2002 at 16:17:52 from (207.253.209.246):
A few weeks ago I was using my loader with its lights for the first time and at one point they went out. Found the 20a fuse and it was all melted, half the connector with it. The fusible link part of the fuse was like new. Replaced the fuse and a couple of days ago, with the lights on in daylight to see if all was well, the 30a main fuse goes. It was all melted too, so much so that half a tab remained in the hole when I extracted the fuse. Again, the useful part of the fuse was untouched. These are the automotive colour-coded plastic fuses with a couple of spade connectors sticking out the bottom. The light circuit looks pretty sound though the switch is a replacement, and the problem I thought at first. The only reason I can come up with to explain things is that, from the machine having sat outside, there was corrosion in the connector between the two parts to the point where the heat generated by the resistance was enough to melt fuse and holder (and the link part of the fuse wouldn't be involved). Is this possible ? If you've had a machine sit outside a while you might want to replace your fuses.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|