Posted by IH560MAN on August 08, 2022 at 18:52:53 from (136.175.36.118):
My 560 with the D282 recently started puking oil out of the blow by tube, I went to change the oil and filters and found large chunks of the piston sleeve in the oil pan. Now for the first time I am doing a in frame overhaul. After pulling the head it was obvious the sleeves were loose, they would come out with the piston with a few light taps from underneath. All of the bores appear to be in good shape (no cracks) but it appears someone has worked on the tractor before permatex gaskets and such. The crank bearings i toom out were (2420 FM VE 010 U.S.) im guessing this is -10 bearing? the sleeves say SL189MSTD and on the bottom of the sleeve 4391. I started measuring the crank where the bearing fits. The book says the crank original is 2.3735 my measurments are...
6=2.3514
5=2.3514
4=2.3735
3=2.3715
I stopped at that... I'm trying to figure out what size bearing i should go with?
What size sleeve I need? standard or oversize?
Why the sleeve shattered in the first place? I noticed three of the sleeves the had cracks around the top of the flare. maybe the head wasn't tightened correctly or the head bolts stretched?
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.