Posted by Matt E. on October 05, 2017 at 11:29:22 from (173.216.243.47):
In Reply to: Case 4 bottom plow posted by Matt E. on October 05, 2017 at 07:13:47:
I've heard good things about Case plows, namely that they pull easily and have good clearance. I have a IH #60 three bottom and in the sandy clay at the farm in Montana the 560 pulls it in 3rd direct pretty easily. Dad liked to putt along in 2nd but I didn't want to spend all day so when he would leave me alone, I'd kick it up a gear. But he isn't around anymore to direct work so I just have his wisdom to work on.
I also have a WD-9 that I'd like to eventually match up with a 4 bottom. It has very wide rear tires so I think I'd have to keep it out of the furrow to plow and just run right next to it. Would it be possible to adjust the hitch on a Case plow to allow for the plow to be in the furrow and the tractor just out of it? Or does it have to be dead center? Maybe move the drawbar over towards the furrow? Adjust both a little? Never tried to plow without everything directly in line with the center of the tractor and plow.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.